Misc parts

[ragtop88]

'88 TBI ECM w/ Hypertech Thermomaster chip....make offer

'88 TBI with a modifed FPR to be adjustable....I didn't run it long as I switched to TPI...was only used to start the new engine, so I don't have a lot of "numbers" for this, Make offer

'88 TBI intake, Powdercoated chevy orange, and the bolt holes have been slotted for use with pre-87 heads (or was it '88) $25 (may be spoken for)

Eurethane side skirts for 80's era Trans Am....Silver in color, need paint, couple cuts on th eunderside that are not visible when mounted on the car $50 obo plus shipping.

'84 Disc Brake rear with 3.73 gears and shot posi. $125 obo will sell brakes separately for $50....will sell gears as well for $75 but only if you take the rear as well....need room in the garage

LT1 24 lb injectors, used but they have been cleaned (before I bought them) $85

4th gen Autometer a-pillar 2 guage pod, new, SUmmit had sent the wrong one way back when $10 obo

TRW Forged Blower Pistons, 350 standard bore, mounted on reconditioned factory rods, that have been balanced and polished, comes with rings as well, installed but engine never fired or installed in car....$250 obo

All items are plus shipping as they are priced pretty reasonable I think.

[88WS6TA]

Do you know the part number on the pistons?

[ragtop88]

Not off the top of my head, but I believe they are the 19cc dish version

[88WS6TA]

How can you sell them If you don't know what they are. Go look and let me know. Do the rods have ARP bolts?

[88WS6TA]

I forgot to ask what rings do they have, cast?

[ragtop88]

L2403N STD and because you made me get off the couch, the price on the pistons is now $350 FIRM... :D Heck I don't know what the rings are now its only been about 4 years since I built and unbuilt that engine..if I had to guess they are probably chrome moly, but no guarantee on that....heck at this price consider the rings as free anyways. I can't find that part number in the FM catalog, but it has been a while....I think they are simialr to the L2441F ones listed now...

[WS6 VERT]

Originally posted by ragtop88:
and because you made me get off the couch, You read the message board from your couch!!!!!! And I thought I was lazy!!!! graemlins/roll.gif

[ragtop88]

Heck ya...do most of my surfing at night and on the weekends with my laptop....I'm sitting here watching the Red Sox/Yankee game....I was hoping to get something done today, but I started watching this instead....

[88WS6TA]

Tom, I found the specs on the pistons. I will go over and push a pistion out of the block tommorrow and see if I can use a std piston. Thanks for all your effort on getting the numbers for me. I hope you didn't pull a muscle getting off the couch.

[WS6 VERT]

graemlins/roll.gif graemlins/roll.gif graemlins/roll.gif

[ragtop88]

Insult charge....pistons are now $400... :D

[SportCoupe]

Do I hear $450? ;)

[88WS6TA]

Those must be mighty nice pistons for you to want to keep them so bad.

[ April 13, 2002, 22:28: Message edited by: 88WS6TA ]

[RobP]

Me thinks someone does not see the humor in this.
How in the HE double toothpicks can you post an ad for used parts and not have triple cross referenced part numbers available? Geez :rolleyes:
Pistons make great shop ash trays by the way...

[ April 13, 2002, 22:34: Message edited by: RobP ]

[88WS6TA]

Tom will not even answer all the questions. I still don't know what bolts are in the rods.
Some one needs to give Tom a lesson on how to sell things.
So how much money we up to now.

[ragtop88]

Good lord....if memory serve, which it may or may not...remember I'm getting old...I think they were not ARP, but were maybe the Mr. Gasket "equivalent" of high strength rod bolts....if that makes sense....anything else??

[GMC-YA]

Tom I'm interested in the injectors, if you are coming to Savannah for the cookout I'll get them there, if not I'll just send you a money order. Thanks!

[ April 14, 2002, 10:07: Message edited by: Chris Lee ]

[WS6 VERT]

Are the '84 calipers the same as the '87? My R/R caliper leaks once in a while.

[ragtop88]

Yeah GMC, I believe I'll be going so I'll bring them.... Bernard, I believe they are....they are the cast iron versions....I'll take a look at them....chances are good that the system was overhauled prior to the rear coming out, but I'll have to double check....

[86IROC]

Tom, you have mail.

[ragtop88]

Well it looks like the rear may be sold, but in case its not, I just remembered that one of the hard brake lines needs to be replaced as it got damaged when the rear was removed....sorry for the change

[ragtop88]

OK the rear is sold and so are the injectors....if any of these fall through I'll repost the items.

[RobP]

Could you post the part numbers to the damaged brake lines and the part numbers for the injector washers tongue.gif