3gc
09-16-2002, 04:17 AM
I have a TPI Setup off an 87 305. It includes: baseplate, plenum, plenum extension, runners, throttle body, fuel rail, fuel injectors, Distributor, Computer, water neck most of the sensors. The MAF, iac motor and iac housing aren't included. I can include the air box if it's needed. It's off the Z28 pictured below.
http://www.3gc.net/camaro/images/87Z28/engine_th.jpg
I have an almost comlete set of groud effects off my 89 RS. Everything is included except the nose and front spoiler. The passanger side rocker panel has a small tear on the bottom. Hardly noticeable and could be repeaired fairly easily. Most parts are off the car pictured except the door peices, they are off the 87 Z28.
http://www.3gc.net/camaro/images/green-hood_quarter.jpg
Iroc Style grid Tailights
http://www.3gc.net/camaro/images/89RS-iroc_taillights.jpg
New ABS Backed headliner with medium gray fabric for a hardtop. I bought this from Thirdgenresource last year for $150 but have since decided to use a t-top car for my project. It has a tiny scratch on it from a screwdriver, it's covered by the sunvisors though.
New Hardtop Sunvisors, Installed but the car has never been driven, Medium Gray
http://www.3gc.net/camaro/images/hatch_2-21-02.jpg
This is the best picture I could find of the headliner and sunvisors.
TPI Baseplate, I got this from a TPI setup I bought off ebay a while ago. But I couldn't use it with my vortec heads so I need to get rid of it.
145 MPH speedo, mechanical, reads 10,*** miles. Just the speedo, or the whole cluster with a v6 tach.
Red arm rests, good condition, no separating, from an 87.
Dome light with new lens.
Front set of 15 x 7 Z28 Rims
B pillar molding for hardtop
Make me an off on any parts.
Email me @ Chris@3gc.net
[ September 16, 2002, 01:18: Message edited by: 3gc ]
http://www.3gc.net/camaro/images/87Z28/engine_th.jpg
I have an almost comlete set of groud effects off my 89 RS. Everything is included except the nose and front spoiler. The passanger side rocker panel has a small tear on the bottom. Hardly noticeable and could be repeaired fairly easily. Most parts are off the car pictured except the door peices, they are off the 87 Z28.
http://www.3gc.net/camaro/images/green-hood_quarter.jpg
Iroc Style grid Tailights
http://www.3gc.net/camaro/images/89RS-iroc_taillights.jpg
New ABS Backed headliner with medium gray fabric for a hardtop. I bought this from Thirdgenresource last year for $150 but have since decided to use a t-top car for my project. It has a tiny scratch on it from a screwdriver, it's covered by the sunvisors though.
New Hardtop Sunvisors, Installed but the car has never been driven, Medium Gray
http://www.3gc.net/camaro/images/hatch_2-21-02.jpg
This is the best picture I could find of the headliner and sunvisors.
TPI Baseplate, I got this from a TPI setup I bought off ebay a while ago. But I couldn't use it with my vortec heads so I need to get rid of it.
145 MPH speedo, mechanical, reads 10,*** miles. Just the speedo, or the whole cluster with a v6 tach.
Red arm rests, good condition, no separating, from an 87.
Dome light with new lens.
Front set of 15 x 7 Z28 Rims
B pillar molding for hardtop
Make me an off on any parts.
Email me @ Chris@3gc.net
[ September 16, 2002, 01:18: Message edited by: 3gc ]